One of the rooms in the home that accumulates the most dirt is, without a doubt, the bathroom. Despite being where we clean ourselves, this place tends to accumulate quite a few unsightly blemishes as a lot of moisture accumulates, leading to mould and mildew. In addition, things such as limescale and soap scum accumulate in the tile joints. And the worst thing is that we can worsen the situation when we want to clean and use products that will further damage our tiles.
Read Also: How to Soften Leather?
Since you do not want your toilet to be in these conditions, we will tell you how to clean bathroom tiles. First, you should know there are two main options: resort to the specific products created for this cleaning or make your cleaners and homemade tricks. You decide what you prefer to use, although first, you should read these tips to leave the impeccable bathroom we give you.
Clean Tiles with Vinegar
One of the most classic ingredients in terms of cleaning is vinegar, either for the bathroom or any other room or element in the home. Learn this trick well because once you try it, you won’t be able to stop repeating it. Of course, the smell will play against us this time, so you should be forewarned and open the windows before cleaning.
Read More: How to be Punctual Everywhere?
You only have to take a vaporizer, fill it with water, and pour a good stream of vinegar. Then mix it well and start spreading it over the tiles. We recommend you take a sponge with a scouring pad to rub well and remove the dirt. Remember to clean again with water to remove as much of the vinegar odour as possible.
Cleaning Tiles with Baking Soda
Another traditional product used in cleaning is bicarbonate. However, with this product, we must be careful because we have to use gloves to avoid damaging the skin of the hands. In addition, we also recommend that, as in the previous case, you open the windows to ventilate since it is a strong product.
Mix the baking soda well with some liquid soap to clean with this remedy. Once the mixture is done, all you have to do is apply it to the tiles. Depending on how much dirt they have, you will put more or less on them, which will take more or less time. Therefore, we recommend that if there is a large amount of dirt, let the bicarbonate mixture act for a few minutes. You will also have to wait longer in the joints since it is an area where more humidity, soap residues, and dirt accumulate.
Cleaning Bathroom Tiles with Ammonia
Ammonia is another product that can be used to make a home remedy that allows us to clean bathroom tiles. Of course, remember what we have already indicated: ventilation is very important on these occasions. In addition, as it is corrosive, you should also wear gloves and avoid splashing them on your face or eyes. In that case, you should rinse very well with plenty of water.
Also Read: Grooming Tips for Men and Women
Using ammonia is usually highly recommended when traces of lime and grease stains have accumulated in our bathrooms. All we have to do is pour a stream of ammonia into a water container. You must take a sponge or cloth, dip it in the mixture, and rub it well on the tiles. Once you have cleaned them, take another cloth or rag free of ammonia traces and pass it over the entire surface to remove the remains.
Clean Tile Joints
To clean the joints between the tiles, we recommend using a toothbrush. Along with this device, you must make a mixture of water and bleach, one of the great allies for whitening. Therefore, dip the brush in the liquid and rub well to remove the dirt. When you’re done, wipe it down again with soapy water to prevent any residue from being left behind. Again, you must cover your hands with this ingredient to avoid damage.
Clean with Rubbing Alcohol
Finally, the trick that we propose is to clean the tiles with alcohol, a product that we usually have in our home. To use it you can do it in two ways. First, pour a little on a cloth and rub the tiles well; you will see they remain shiny. However, you should also ensure the cloth does not release lint.
On the other hand, you can mix the alcohol and ammonia in equal amounts with a jet of detergent and plenty of water. This mixture will also be very effective and will give very good results.
How to Keep Bathroom Tiles Clean?
These cleaning tricks are usually very effective when cleaning the dirt accumulated over a long period on the tiles. However, those stains may already be so encrusted that they are tough to remove, and some may even be impossible. Therefore, what you should do is maintain a small daily cleaning routine and follow the following tips that we are going to give you:
You Can Read: How to Cure Hangover?
- Ventilate the bathroom: when we finish taking a shower, we will notice that a large amount of steam and heat accumulates in our bathroom. Therefore, we must find a way out of this so that it does not accumulate and spoil our bathroom. It is very important that we ventilate for a few minutes to prevent mould from appearing on our tiles. In fact, you can take advantage of this moment after the shower to clean with a cloth, since with the humidity, it will be easier to remove the dirt.
- Clean in the moment: do not leave for tomorrow what you can do today. If at any time you dirty something or see a stain, do not wait to clean it, because the more time passes, the more embedded it will be and, therefore, it will be more difficult to remove it.
